Force Measurement Testing Improves Products and Consumer Safety
Across every industry, force measurement solutions are utilized to improve product performance, safety and quality. Sensor technologies are used every day to test various consumer products’ weight, torsion, tension, compression, fatigue, impact, and materials.
Force measurement testing is used throughout the product development lifecycle, from concept and R&D, through engineering and testing, to manufacturing and distribution, leading to eventual utilization. Interface load cells are commonly integrated into actual consumer products for activation and to measure performance during use.
Interface force measurement solutions are also used in the testing of equipment, machines, and tools used in the production of all types of products and goods. Our products are used in industrial automation robotic arms as well as within lifting equipment deployed to move materials around a facility.
The key to all force measurement testing is accuracy and reliability of data, as well as selecting the right type of force sensor for the specific product being testing.
Types of Product Testing Applications Using Interface Measurement Solutions
- Weighing Applications: Interface miniature load cells are often for product testing to measure the exact weight of consumer products, such as food, beverages, and electronics. This information is critical R&D, as well on the production line and to meet the exact product specifications. Our load cells help to ensure that the products are not underweight or overweight, and comply with regulations. Read more about Load Cells for Smarter and More Efficient Weighing
- Material Applications: Interface LowProfile load cells are often found in product testing labs to assess the strength of materials used in consumer products such as plastics, metals, and mixtures of composites. The measurements gathered during the product testing safeguards consumers and confirms the product’s durability. Read Interface Solutions for Material Testing Engineers
- Force Applications: Interface load cells, torque transducers, and instrumentation are used in complete test systems that examine the usability of products such as exercise equipment, appliances and electronics. The data acquired in shear, tensile and force testing is important to understand if the product meets design specifications, is easy to use and does not require excessive force to work.
- Safety Applications: One of the most important product use cases for Interface measurement solutions is to test the safety of products such as furniture, toys and automobile features. It is a requirement for every maker of products that are not hazardous and will not cause injury to consumers. Read Interface Solutions for Safety and Regulation Testing and Monitoring
To give you a better idea of how our load cells and instrumentation are utilized in distinct types of product tests, we have included a few application notes below outlining real-world examples of force testing projects.
Bicycle Helmet Safety and Impact Product Testing
A high production bicycle manufacturing facility set up a product testing lab to measure the impact of the safety of their helmets when dropped from different heights onto a flat surface such as an anvil. This test is necessary to ensure consumer safety and that the products are made with the highest quality materials to protect the rider. Interface suggests installing the 1101 Compression-Only Ultra Precision LowProfile® Load Cellat the bottom of an anvil. The bike helmet is then dropped from multiple heights and at multiple angles onto the anvil. The measurements from impact are then recorded and logged throughout the product testing using Interface’s INF-USB3 Universal Serial Bus Single Channel PC Interface Module with supplied software. Every design or material change runs through the same rigorous testing protocols using these high accuracy measurement solutions. Read CPG Bike Helmet Impact Test
Product Weighing of Consumer Water Bottles
A manufacturer of glass bottled water needs to dispense the exact amount of fluid into each bottle and then weigh the water bottle to ensure it is at the labeled weight on the product packaging. The product testing of the manufacturing equipment is used to minimize waste and to meet the weight requirements to ensure consumer satisfaction. Interface suggests using the MBP Miniature Beam Load Cell and attaching it under a plate or platform where the water bottle is placed on while it is being filled with fluids. The force weight is measured by the MBP Miniature Beam Load Cell and connected to the 9870 High Speed High Performance TEDS Ready Indicator where results are captured, displayed, and logged for quality control. Read CPG Water Bottle Dispensing and Weighing
Product Test Lab Conducts High Volume Tensile Force Testing
A product test lab is constantly requested to conduct a series of tensile force tests on different samples and materials until failure. These materials include plastic, steel, or woven fabric, and are utilized in the design and manufacturing of several consumer products. The lab professionals want to measure tensile strength, yield strength, and yield stress for every submitted product material sample. For the tensile test stand, we recommend using Interface’s 1200 Standard Precision LowProfile™ Load Cell be installed into the test frame. As the tensile test is conducted, force results captured by the load cell and extensometer are synchronized through the SI-USB4 4 Channel USB Interface Module. The results are displayed on the customer’s computer with supplied software. Learn more by reading Material Tensile Testing.
Interface’s high precision force sensor technologies used in robotics have revolutionized the manufacturing of consumer products. With automated assembly lines and robotic arms taking charge, these machines work efficiently to mass-produce consumer goods. Quality control of all the products we provide you for testing is one of the main focuses of Interface, as we want to keep your customers happy and safe.
Interface’s experienced team are renowned specialists in force, torque and weight measurement manufacturing and technology. Our depth of knowledge and wide range of capabilities create custom solutions of all types, whether special transducers made to your exact specifications or complete customized sensor, instrumentation, and software systems. We collaborate with you to ensure the product specifications you need are designed to match your precise requirements.
ADDITIONAL RESOURCES
Introducing the Interface Consumer Product Testing Case Study
Interface Solutions for Consumer Products
Force Measurement is Reducing Waste and Automating the Consumer Packaging Industry
Applications for Consumer Products and Packaging
Load Cells for Consumer Product Applications
Why Product Design Houses Choose Interface
