Posts

Innovative Interface Load Pin Applications

A load pin, which often replaces a standard clevis or pivot pin, is a strain gage sensor that measures the force applied across the device. The strain gages are installed within a small bore through the center of the pin. Interface load pins have been used in a wide variety of projects across many industries.

Load pins are a simple, but highly powerful sensor that provides data collection for accurate and frequent measurement. The load pin can replace a bolt, clevis, sheave, and an equalizer pin, as well as other load-bearing components to measure tensile and compression forces.

Machined from high tensile stainless steel, Interface load pins are suitable for exposed situations including seawater. We offer standard sizes of load pins between 1.1K lbf to 3.3M lbf (500kgs to 1500 MT). We also offer wireless load pins. Interface load pins are custom manufactured to meet specific dimensional requirements for each application, as detailed in our Use Cases for Load Pins webinar.

The most commonly referenced applications for load pins are for overhead equipment like cranes and lifts. Through ingenuity of engineers and our customers, load pins are rapidly expanding in popularity for infrastructure, aerospace, maritime, agriculture, and industrial use cases. The load pins of today are used to test and measure force, load, and weight in a much larger variety of applications. They are also growing in demands due to their wireless capabilities for both short and long distances. This includes uses not only for cranes and lifting devices, as well as construction equipment, industrial machines, nautical craft and equipment, aerospace structural environments, and civil engineering applications.

Infrastructure investment and projects around the world are on the rise. Investments in transportation ways like highways, waterways, bridges, mass transit, water supplies and power generation are frequently in demand of load pin solutions for use in all phases of the projects, from construction to maintenance and real-time monitoring.  Some of these examples are highlighted in Infrastructure Projects Rely on Interface.

Interface has a great deal of experience supplying ruggedized and standard use load pins for testing. Our load pins are highly demanded in the infrastructure industry not only due to the accuracy and reliability of our sensors, but also due to the fact that we offer a myriad of communication channels to offer both wired and wireless solutions. As requirements are made to repair and rebuild public infrastructure resilience, equity, and safety for all users are key criteria in design and build stages.  This is where Interface load pins are key to the solution, for durability, accuracy, quality, and ease-of-use.

Interface captured a few application examples of how our load pins are used for different types of projects, from maritime submersibles to monitoring new bridges during earth’s constant shifting.

AEROPSPACE:  Landing Gear Joint Testing

A global manufacturer in aerospace needs to test their new assembly and design by testing its landing gear joints. They want to ensure there are no flaws in the gear shock absorber design and can handle the applied forces when the craft lands from a flight. Interface’s WTSLP Wireless Stainless Steel Load Pins can be installed and replace the normal pin joints. The aircraft undergoes multiple drop tests at different heights, where the forces are applied on the load pins which then transmits the measurement data. The force results are transmitted wirelessly to the WTS-BS-4 USB Industrial Base Station and the WTS-BS-1-HA Handheld Digital Display for multiple transmitters. Read more about this load pin use case here.

MARITIME: Quick Release Hooks (QRH)

A customer wanted to test their quick release hook (QRH) system when their vessels are docked. They wanted to ensure the mooring lines are secured, but also, the quick release hooks were able to be easily and safely released. Interface’s WTSLP Stainless Steel Load Pin was installed into the quick release hook, where forces from the mooring lines can be measured and displayed when paired with the WTS-BS-4 USB Industrial Base Station. The load tension forces were displayed in real-time on the customer’s PC or laptop. The WTS-RM1 Wireless Relay Output Receiver Module alarm could also be triggered for the customer when maximum safety work load capacities have been reached or are overloaded. Using this solution, the customer was able to determine if their quick release hooks worked effectively within the safe working limit specifications, and was aware of any potential overload situations. Read more here.

INFRASTRUCTURE: Bridge Seismic Force Monitoring

A customer wanted to monitor seismic activity that occurs to a bridge by using force sensors and then continuously monitoring bridge forces before, during and after earthquakes occur. The customer preferred a wireless solution so they would not need to run long cables on the bridge. Interface helped to develop its LP Load Pin, which were custom made to fit their needs along Interface Inc. WTS Wireless Telemetry System continuous force monitoring was able to take place without long cables. Using this solution, the customer was able to monitor continuous loads, log information to the cloud and review information. Read about this solution here.

AGRICULTURE: Tractor Linkage Draft Control

A farming operation needs to measure the forces applied on their tractor’s draft control, between the tractor and any linked on attachments. Measuring the force helps the farmer sense any strains on the hitch of the tractor, and will be needed in order to apply any specific settings to the draft control when the tractor encounters rough terrain.  Interface’s WTSLP Wireless Stainless Steel Load Pin is a wireless load pin that can be installed directly in the hitch, replacing the normal shear pin of the tractor. Force results are transmitted wirelessly to the WTS-BS-4 USB Industrial Base Station, where they can view the results on a computer using Interface’s WTS toolkit. The customer can also view results on the WTS-BS-1-HS Handheld Display for Single Transmitters in real-time. Read more about this IoT Agriculture solution here.

 

INDUSTRIAL AUTOMATION: Crane Block Safety Check

A customer wanted a system to detect if their crane block can lift heavy loads securely, in order to keep working conditions and personnel safe. If lifting capacities are exceeded, the customer wanted a system to alarm them in real-time. Interface’s WTSLP Wireless Stainless Steel Load Pin replaced the existing load bearing pin in the crane block in order to measure the force being applied by the heavy load. The data was transmitted and displayed through both the WTS-BS-4 USB Base Station (when paired with the customer’s supplied PC computer/Laptop) and the WTS-BS-1-HA Wireless Handheld for real-time results. The WTS-RM1 Wireless Relay Output Receiver Module could also trigger an alarm when maximum capacity has been reached. The WTSLP Wireless Stainless Steel Load Pin, combined with the WTS products, was able to measure and determine force applied the moment a heavy load is lifted. The results were transmitted wirelessly, and ensured the customer whether or not the crane block was safely operational during production.

Are load pins the right solution for your project? Contact our load pin application engineers to learn more.

ADDITIONAL RESOURCES

Load Pins, Tension Links, and Shackles

Uses Cases for Load Pins

Recap of Use Cases for Load Pins Webinar

Applications Catalog

Load Pins 101

LP-TL-Shackles-Brochure

Interface Helps to Move Agriculture Innovation Forward

The agriculture industry is the backbone of most economies, as food production and farming are essential to everyone’s existence around the world. Advancements and innovations in this market are core to growing a sustainable food supply as well as for safety and productivity management across the agriculture supply chain. Interface is proud to support a range of customers developing innovative sensor-based tools and equipment used in the field.

As a complete solutions provider, we provide standard and engineered to order measurement products that are designed for modern agricultural testing projects and as components for OEMs. Our Interface expert application engineers can also help in the design of customized solutions for all types of applications using our products in harsh environments, for material handling, within complex agricultural machines, and for extreme weather conditions, and engine testing. These are typical use cases that rely upon the quality, accuracy and reliability of measurement solutions from Interface.

Our customers are in a range of agriculture submarkets, from heavy machinery to food production. The common products Interface supplies to these segments include our precision load cells, torque transducers, multi-axis sensors and miniature load cells, along with the popular tension links, load shackles, and wireless instrumentation. We also provide advanced sensor technologies and digital monitoring equipment for agricultural-based manufacturing, farm and field management, inventory monitoring, equipment testing, livestock weighing and ranching, as well as food processing and grain monitoring.

In the application use cases below, we provide a few examples of agricultural solutions that are using various Interface force measurement products.  To review a larger series of applications, visit our Interface Agriculture Solutions here.

Silo Monitoring and Weighing

For customers who need to weigh and monitor the content inside their silos, Interface can offer our A4200 Zinc Plated or A4600 Stainless Steel Weigh-check Load Cells, paired with 1280 Programmable Weight Indicator and Controller. Using these products, the customers can monitor the amount of content by weight in their silo. In this application example, the customer was provided a customizable solution to monitor and weigh their silo. Results from the 1280 Programmable Weight Indicator and Controller were sent to the customer’s control center. Read the entire application note here.

Tractor Linkage Draft Control

A large commercial farmer group wanted to measure to measure the forces applied on their tractor’s draft control, between the tractor and any linked-on attachments. Measuring the force will help the farmer be able sense any strains on the hitch of the tractor and will be needed to apply any specific settings to the draft control when the tractor encounters rough terrain. Interface supplied a WTSLP Wireless Stainless Steel Load Pin, which is a wireless load pin that can be installed directly in the hitch, replacing the normal shear pin of the tractor. Force results are transmitted wirelessly to the WTS-BS-4 USB Industrial Base Station, where the farmer can view the results on their PC computer or laptop with the supplied WTS toolkit. The customer can also view results on the WTSBS-1-HS Handheld Display for Single Transmitters in real-time. Using these products, the farmer can determine the specific draft control settings for their tractor. Read more about the tractor application here.

Poultry Feeder Monitoring

A customer wanted to monitor the motor that operates their poultry feeders. The poultry feeders must give out an equal distribution of feed per poultry house. We provided a solution using the T5 Standard Precision Pedestal Mount Shaft Style Rotary Torque Transducer, with the speed and angle options, which will be attached between a poultry feeder and a motor with Interface’s couplings. Torsion measurements can be graphed and logged sing the 9850 Torque Transducer and Load Cell Indicator. With this solution, the customer was able to monitor their poultry feeders and ensure that every feeder got the same amount of food distributed to it.

Interface load cells, torque transducers, and data acquisition systems are ideal for a wide variety of agricultural applications. These products can be paired together to measure and ensure efficiency, sustainability, and proper production planning. Interface products can also regulate through harsh weather conditions such has humidity and unbearable temperatures while still maintaining a high testing and measurement performance. Our custom solutions application engineers will work alongside you to create the most effective and efficient solution based on your needs if standard does not fit your exact requirements. Read more here.

To check out additional application examples related to the agriculture, and other industries, please visit our website at www.interfaceforce.com/application-notes/.  Be sure to check out these great new farm applications.

LIVESTOCK WEIGHING

 

CHICKEN WEIGHING

 

EQUINE REIN TESTING

Load Pins 101

A load pin is a type of load cell that can replace bolts, clevis, sheave, and equalizer pins, as well as other load-bearing components to measure tensile and compression forces. Load pins are internally gauged with a bored center containing strain gauges, allowing them to convert force into an electrical signal for engineers to accurately collect data.

Most applications for load pins in the past have been for overhead equipment like cranes and lifts. Load pins have expanded in popularity and are now often used to test and measure force, load, and limitations in a much larger variety of applications. This includes uses not only for cranes and lifting devices, but also construction equipment, industrial machines, nautical craft and equipment, aerospace, and civil engineering applications. A primary system approach with structural applications is for safety and to prevent excesses in loading and lifting.

New model types with wireless and Bluetooth technology are also resulting in more use cases for these specialized force measurement solutions. This applies to both test and measurement as well as for installed OEM components within a larger structure or apparatus.

Top Load Pin Benefits

  • Easy to install new or retrofit
  • Robust construction
  • Replaces existing load bearing pins without any system modifications
  • Engineered to order designs available
  • Can be supplied with integral connector
  • Custom sizes and higher capacities available

Load pins come in many standard shapes and sizes, as well customization options to meet a specific design or use requirement. Interface provides these measuring devices, which often replace a bolt or pin, for safety and application monitoring. Some of our load pins are exclusively designed to meet the needs of applications in hazardous environments like the oil and gas industry, or marine industry where they’ll be submerged in water during testing and for continuous use.

The Interface Load Pins are machined from high tensile stainless steel and are suitable for exposed situations including seawater. We offer standard load pins with ratings between 1.1K lbf to 3.3M lbf (500kgs to 1500 MT). We also offer custom manufactured load pins suit applications from 100 kgs to 1500+ MT.

LP Stainless-Steel Load Pin – Great for lifting applications for both short and long distances. This product can be amplified with 5VDC, 10VDC or 4-20mA Outputs. It can also be made to meet ATEX requirements. Model LP Load pin is available in capacities up to 3,000,000 lbf (13.3 kN).

WTSLP Wireless Stainless-Steel Load Pin This advanced load can transmit wirelessly up to 600 (1,969 feet) meters in distance (clear line of sight) to a handheld display or USB base station.  The capacities range goes all the way up to 3,000,000 lbf (13.3 kN). The wireless option utilizes low power consumption for long battery life. It is configured and calibrated via PC using a base station and telemetry toolkit and compatible with Interface WTS Wireless products. The load pin is robust and uses a lightweight housing. It is environmentally sealed to IP67.

Load Pin Application

One of the largest scale applications of load pins we provided were used to measure force on a large bridge infrastructure project in the western U.S. The goal was to continuously monitor the standard force created by regular traffic, as well as the seismic force before, during, and after earthquakes. The monitoring sensors needed to be integrated into a dampener that would be attached to the structural tower.

The solution allows the company to monitor force from emitted data to cross-reference the standard traffic force with the seismic force to understand its effect on the bridge. Its purpose is to help with predictive maintenance and influence future bridge designs to better compensate for the forces of an earthquake or other natural disasters, which are common in this part of the world.

READ THE SEISMIC BRIDGE MONITORING APPLICATION NOTE HERE

READ THE INFRASTRUCTURE CASE STUDY HERE

The project required a custom product that could handle the inimitable and considerable force of a bridge under every scenario of distress. Engineers developed a custom load pin to handle the force of movement in the bridge in the event of an earthquake. This load pin was much larger than our standard version and is rated at 900,000 lbf. The large load pins were designed to be integrated into the dampener with wireless data acquisition modules connected to the load pins to allow for remote access to the data. With the integration of Interface’s custom load pins and data acquisition module, the customer was always able to continuously collect data for real-time evaluation. The sturdy construction of our load pins and 900,000 lbf rating allowed for readings during all degrees of seismic activity.

To learn more about our wide variety of load pins and there many applications, please contact our application specialists today.