Posts

What is Moment Compensation?

Moment compensation refers to a process of adjusting or counterbalancing the effects of an external force or torque, known as a moment, on a system or object. This is often done in engineering or physics contexts where precise control and stability are required, such as the design of force measurement applications.

Moment compensation is often used to prevent unwanted movements or deformations in systems, to ensure precision and accuracy in measurements, or to maintain stability and control during operation. Moment compensated load cells improve accuracy by compensating for the impact of external forces and moments on the measurement, allowing for more precise and reliable measurements.

Most load cells are sensitive to orientation and loading concentricity. When external forces or moments are introduced, measurement errors are more common and reduce the accuracy of the readings. These external forces or moments can come from various sources. Examples of external forces or moments that can affect the accuracy of load cells and require moment compensation:

  • Off-axis loading: When the load is applied off-center to the load cell, it creates a moment that can introduce errors in the measurement.
  • Temperature changes: Changes in temperature can cause thermal expansion or contraction of the load cell, which can introduce measurement errors.
  • Vibration: Vibrations from nearby equipment or processes can cause the load cell to vibrate, creating measurement errors.
  • Changes in orientation or position: Changes in the orientation or position of the load cell can cause gravitational forces or other external forces to act on the load cell, affecting the measurement.
  • Torque: When a load cell is subject to torque, such as twisting or bending forces, it can introduce measurement errors.
  • Wind or air currents: Air currents or wind can create external forces on the load cell that can affect the measurement

A load cell that is moment compensated can minimize or eliminate these errors, resulting in higher accuracy. Load cells with moment compensation can be more sensitive to slight changes in the load, as it can compensate for any external forces or moments that might affect the measurement.

Moment Compensation is an Interface Differentiator

Interface’s moment compensation process reduces force measurement errors due to eccentric loads by deliberately loading cell eccentrically, rotating load, monitoring and recording output signal, and then making internal adjustments to minimize errors. Every product we ship must pass moment compensation specifications and performance requirements. Every Interface LowProfile™ load cell is moment compensated to minimize sensitivity to extraneous loads, a differentiator from other load cell manufacturers.

When load cells are moment compensated, they can be used in a wider range of applications, including those with complex or dynamic loads, which might be difficult or impossible to measure accurately using a load cell without moment compensation. Interface’s LowProfile Load Cell models have the intrinsic capability of canceling moment loads because of its radial design. The radial flexure beams are precision machined to balance the on-axis loading.

Moment compensated load cells are designed to counteract the external forces or moments by using a configuration of strain gages and electronics that can detect and compensate for these forces. The strain gages are arranged in a way that allows the load cell to measure the force applied to it in multiple directions, and the electronics can then use this information to calculate the impact of external forces and moments on the measurement.

Interface uses eight gages, as opposed to the four used by many manufacturers, which helps to further minimize error from the loads not being perfectly aligned. Slight discrepancies between gage outputs are carefully measured and each load cell is adjusted to further reduce extraneous load sensitivity to meet exact specifications.

Moment compensation improves the stability of a load cell, particularly in situations where the load is off-center or subject to torque. This can prevent the load cell from shifting or becoming damaged, leading to more consistent and reliable measurements. It also improves the durability of a load cell, as it can help protect it from the impact of external forces or moments that might cause damage or wear over time.

ADDITIONAL RESOURCES

Addressing Off-Axis Loads and Temperature Sensitive Applications

Contributing Factors To Load Cell Accuracy

Off-Axis Loading 101

How Do Load Cells Work?

Load Cell 101 and What You Need to Know

Get an Inside Look at Interface’s Famously Blue Load Cells

Strain Gages 101